SK-HD1800
System configuration chart
Specifications
Camera Head SK-HD1800
| Model Name | SK-HD1800 (59.94Hz) , SK-HD1800E(50Hz) |
|---|---|
| Image sensor | 2/3-inch equivalent, CMOS image sensor Effective pixels 1,920 (H) × 1,080 (V) |
| Native Scan | 1080/59.94p, 1080/50p |
| Prism | F1.4 |
| Optical Filter | 1x motorized filter wheel ND( CLEAR, CROSS, 1/16 ND, 1/64 ND) |
| ECC | 3200 K, 4300 K, 5600 K, 6300 K, 8000K |
| Lens mount | B4 Bayonet |
| HD Resolution | 1000TVL |
| HD SNR | 62 dB |
| Sensitivity | 1080/59.94p, 59.94i : F10 @ 2000 lx, 3200 K, 89.9% reflectance 1080/50p, 50i : F11 @ 2000 lx, 3200 K, 89.9% reflectance |
| Minimum illumination | 2 lx (at F1.4, GAIN: +24 dB) |
| Vertical Smear | No smear |
| Gain selection | L (low) : -6/-3/0dB M (medium) : 0/+3/+6/+9/+12/+15/+18/+21/dB H (high) : +3/+6/+9/+12/+15/+18/+21/+24 dB |
| Shutter | Preset mode 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 second (59.94Hz) 1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 second (50Hz) Lock scan mode 1/60.37 to 1/1987 second (59.94Hz) 1/50.36 to 1/2025 second (50Hz) AES mode Automatic video level control by shutter speed. |
| Geometric distortion | Negligible (excluding lens characteristics) |
| Registration Overall | 0.01 % (excluding lens characteristics) |
| Dimensions | 133(W) x 191(H) x 262(D) mm |
| Power supply voltage | DC 12 V (10.5 V to 17 V ) |
| Temperature range | Operation -10ﾟC to +45ﾟC , 14 °F to +113ﾟF Storage -20ﾟC to +60ﾟC , -4ﾟF to +140ﾟF |
| Power Consumption | 20W Head only (without VF) |
| MASS | approx. 2.1 kg, 4.6 lbs, Head only (without VF) |
| Input & Output | MON/VF/RET OUT: BNC x 1, HD-SDI REMOTE: 4-pin Multi connector for remote control panel VF: 20-pin Multi VF connector LENS: 12-pin Multi LENS connector MIC: 3-pin XLR MIC-1 connector SD Memory Card Slot |
Fiber Camera Adaptor CA-HF1300
| CCU connector | 1x-type HFOC female connector ( LEMO ) SMPTE-304M-type |
|---|---|
| Intercom | 2x channel, each XLR 5-pin, channel selection, MIC on/off, volume |
| Program audio | 2x, PGM audio level controls w / Chnl1 & Chnl2 intercom mix |
| Teleprompter power output | 1x 5-pin, AC230 V, 100 VA, external prompter R/G Tally drive out ( depending on configuration accessories ) |
| Microphones | Channel 1 & 2 Line or MIC level select ( MENU ), with +48 V phantom power on/off |
| Return/ Aux switcher | 4-input remote AUX / VF video select connector ( RET control ) |
| Video Inputs & Outputs | 1x 3G HD-SDI OUT, 1X SD analog teleprompter out shared with Genlock in, 1x HD-SDI RET OUT |
| Other I/O | 1x 29-pin (for SA-1100 cable-less interface) (female) |
| 1x 5-pin script lamp DC12 V (1.0 A max) (female) | |
| 1x 6-pin VF AUX return (female) (for use in cranes or extended Head / VF configurations) |
|
| 1x XLR 4-pin, DC12 V power input (male) | |
| Dimensions | 133 (W) x 189 (H) x 194 (D) mm |
| Mass | 2.2 kg, 4.8 lbs. approx. |
| Operating temperature | -10ﾟC to +45ﾟC, 14ﾟF to 113ﾟF |